Anhui Keye Intelligent Technology Co., Ltd
AI for Life
Add to Cart
Inspection standards
| Model | Number of camera | Inspection scope | Inspection content | Detection precision | Accuracy | Capacity |
| KVIS -SC06 | 1 set | Concave surface | Black spot (color different) | ≥0.2mm | 99% | 9000- 10000 Per/ hour |
| Transformation | ≥1.0mm | 99% | ||||
| Flash | ≥0.5mm | 99% | ||||
| 4 set | Outside surface | Black spot (color different) | ≥0.2mm | 99% | ||
| Injection incomplete | ≥0.5mm | 99% | ||||
| Flash | ≥0.5mm | 99% | ||||
| 1 set | Top area | Black spot (color different) | ≥0.2mm | 99% |
Machine vision inspection product types are the mainstream intelligent products in industrial production. The product category recognition system is based on computer vision and pattern recognition theory. By acquiring product images, processing and analyzing the images, extracting characteristic parameters reflecting the morphological structure of product varieties, and then using the characteristic parameters to perform feature matching on corresponding products, so as to achieve Product category visual identity.
Product background
Due to the enourmous speed of a closure production line and high quality requirements, closure inspection can be a challenging task. During production, common defects like contamination, flash, short shots and defects at the tamper evident band might occur. Our closure vision systems detect these defects effortlessly. In addition, the quality inspection of our systems include many other common and customized inspection criteria like color, cavity number reading, print control, laser engravings, high voltage micro-hole tests, diameter and height inspection.
No matter whether you produce standard closures or specialty caps like sports caps or push-pull caps, we offer different solutions for any kind of product. Even tethered caps do not present a problem since our inspection system is already prepared for the new EU regulation by means of special tethered cap inspection features.
Inspection principle
The AI inspection system integrates lid feeding and handing equipment, conveying mechanism, visual system hardware and inspection software, and defective product rejection device. The maximum inspection speed is about 30,000 pieces/hour, and the equipment can achieve 7*24 It runs 24 hours a day, which greatly improves production efficiency.
The inspection equipment is equipped with a total of 6 sets of high-pixel industrial cameras to comprehensively detect the appearance of defects of the product. After the system collects sample images, the image processing software is compared with standardized samples to determine good and defective products, and the defective products are automatically eliminated online. , The software will open the sample comparison standard, and the production personnel on the customer site can control the comparison accuracy and choose the accuracy standard most suitable for their own production conditions, thereby controlling the defect rate.
| System parameters | |||
| Dimension | Reference the drawing | Voltage | 220V 20A 50HZ |
| Power | 2.5-3.0kw | Air | 0.5~0.8MPa clean air without oil |
| Temperature | -20℃ ~ 60℃ | Humidity | Less than 50% |
Our advantages