Anhui Keye Intelligent Technology Co., Ltd
AI for Life
Add to Cart
Inspection details
| Name | Visual Inspection Systems for Plastic Centrifuge Tube | Model | Kvis |
| Software Algorithm | Deep Learning | Voltage | Ac220/50Hz |
| Voltage | 200w | Air Pressure | Mpa |
| Transfer Method | Lossless Delivery | Detection Status | Online Real-Time Detection |
| Detection Method | High-Speed Industrial Camera | Number Of Camera | 4-8set |
Product background
The centrifuge tube cover appearance detection equipment is a device for all-round detection of the defects in the centrifuge tube during the production process. Centrifuge tubes are mainly used for various laboratory operations to meet the separation of biological samples, and at the same time, they can store, protect and transfer some test samples. Therefore, many centrifuge tubes will be equipped with corresponding centrifuge tube caps to store samples. Most centrifuge tubes also use different colored caps to distinguish between different samples.
Inspection principle
The centrifuge tube cover appearance detection equipment through the docking front automation mechanism (can directly contact the conveyor line, the waterfall cover machine, the centrifugal turntable and multiple typing mechanisms, specifically based on the production site to determine),the pharmaceutical packaging bottle cap are stably transmitted to a specific detection station.Then transmitted the shooting high-pixel sample image to image processing software by industrial camera, detecting and determining a good product and defective product via AI manually intelligent algorithm, and controlling the corresponding pneumatic components to remove the defective product, and finally get the qualified product. The detecting machine rear end conveying platform can interface the automated packaging mechanism.
There are plastic and glass centrifuge tubes commonly used in laboratories. Generally, plastic centrifuge tubes are used more, because glass centrifuge tubes cannot be used in high-speed articles from: genintech.com or ultracentrifuges. Plastic centrifuge tubes are also made of PP (polypropylene), PC (polycarbonate), PE (polyethylene) and other materials. The performance of PP pipes is relatively good. The plastic centrifuge tube is transparent or translucent, which can visually see the centrifugation of the sample, but it is relatively easy to deform, and has poor corrosion resistance to organic solvents, so the service life is short. Therefore, laboratories generally buy centrifuge tubes frequently.
Features of system
1. The bottle cap inspection machine is equipped with a waterfall cap arranging machine, and can also be interconnected with a leak detector and a baler to realize the automatic operation of the whole process from cap arranging to detection, counting and packaging;
2. 360° no dead angle, all-round detection and elimination of defects such as flash shortage, black spot contamination, deformation, gasket and other defects of bottle caps;
4. Under special conditions, special prisms can be used to realize multi-angle detection;
5. It can be equipped with 2-8 cameras according to the category requirements of actual detection of defects, with an accuracy of 0.1mm-0.3mm;
6. Applicable to all kinds of bottle caps: anti-theft caps, combined caps, butterfly caps, Epoxy caps, aluminum-plastic caps, etc.;
7. Small footprint, simple operation, and manual and automatic switching options are available;
8. Ai deep learning is good at handling all kinds of complex inspection projects, recording, analyzing and statistics of production data, and realizing the automation and intelligence of quality inspection.